There are times when screw compressors have to operate at high ambient temperatures, which raises questions about the impact on this vital machine.

Although all air compressors compress air, there are differences in the way centrifuges, oil rotating vanes, oil-free rotary vanes, pistons, and rollers compress air. You can also check for the turn air converters through various online sites.

Rotary Screw Air Compressors

Image Source: Google

The rotating screw that compresses the air is in the center of the figure. In the case of an oil-filled air compressor, the bag with the rotating screw is filled with oil and the oil acts as a seal that supports the compression and suction of heat from the compressed air. 

With an oil-free rotary screw compressor, the bag is oil-free and approximately hotter than an oil-filled air compressor. For both air compressors, an increase in ambient temperature increases the operating temperature of the air compressor.

The potential impact on a screw compressor operating beyond its design point is that it can shorten the life of the motor or cause it to fail. Working with an electric motor on top of its thermal structure is likely to result in winding and/or bearing failure. 

A good analogy to painting on an air compressor is the buildup of plaque on your teeth. Paint or dirt/particles collect in the air compressor. Non-genuine oil will cause hole accumulation, the backlash of the rotor/stator, etc. 

This can shorten the life of the grille and lead to premature restoration or replacement. This may mean long, unplanned downtime with unexpected maintenance costs.

There are various types of filters used in the industry today. Compressed air filtration is one of the most common and most important of filtration in the industrial market today. This article will focus on filters for compressed air systems. This type of filter is very important for many applications such as removing solid particulates in the water, oil from compressed air systems. 

Investments in the most reliable filter for your air compressors will prevent you from finding a lot of short and long-term problems with compressed air equipment and will save far downtime and replacement parts in your compressor.There are manufacturers who offer delta gauges as a part of the filter assembly; This shows a decrease in pressure and increasing pressure across the filter.

Image Source Google

An increased pressure drop indicates that the filter element does its job to trap and suspend debris, removing it from the airflow and the compressed air system itself. On the other hand, a decrease in pressure drop means that the filter element is close to the blockage. The dirty air, the faster you will be clogged.

Contaminated compressed air filter elements will cause air supply problems is not enough and are often caused by the element air filter becoming clogged and it chokes the air supply. In the case of the air tool or application not getting enough air pressure, check the filter element. 

Chances are it needs to be cleaned or replaced depending on the type. Following strict time table maintenance will keep the problem to a minimum.